IPC-Stelle: F41A [Version 2017.01]

SymbolTypTitel
FSKMECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING
F41USKWEAPONS; BLASTING
F41KLWEAPONS
F41AUKLFUNCTIONAL FEATURES OR DETAILS COMMON TO BOTH SMALLARMS AND ORDNANCE, e.g. CANNONS; MOUNTINGS FOR SMALLARMS OR ORDNANCE [5]
F41A 1/00HGRMissile propulsion characterised by the use of explosive or combustible propellant charges (projecting missiles without use of explosive or combustible propellant charge F41B; launching rockets or torpedoes F41F 3/00; missile self-propulsion F42B 15/00) [5, 2006.01]
F41A 1/02UGR1
.Hypervelocity missile propulsion using successive means for increasing the propulsive force, e.g. using successively initiated propellant charges arranged along the barrel length; Multistage missile propulsion [5, 2006.01]
F41A 1/04UGR1
.Missile propulsion using the combustion of a liquid or gaseous fuel, e.g. hypergolic fuel [5, 2006.01]
F41A 1/06UGR1
.Adjusting the range without varying elevation angle or propellant charge data, e.g. by venting a part of the propulsive charge gases, or by adjusting the capacity of the cartridge or combustion chamber [5, 2006.01]
F41A 1/08UGR1
.Recoilless guns, i.e. guns having propulsion means producing no recoil [5, 2006.01]
F41A 1/10UGR2
. .a counter projectile being used to balance recoil [5, 2006.01]
F41A 3/00HGRBreech mechanism, e.g. locks [5, 2006.01]
F41A 3/02UGR1
.Block action, i.e. the main breech opening movement being transverse to the barrel axis [5, 2006.01]
F41A 3/04UGR2
. .with pivoting breech-block [5, 2006.01]
F41A 3/06UGR3
. . .about a horizontal axis transverse to the barrel axis at the rear of the block (F41A 3/08 takes precedence) [5, 2006.01]
F41A 3/08UGR3
. . .carrying a rotably mounted obturating plug of the screw-thread or the interrupted-thread type (F41A 3/30 takes precedence) [5, 2006.01]
F41A 3/10UGR2
. .with sliding breech-block, e.g. vertically [5, 2006.01]
F41A 3/12UGR1
.Bolt action, i.e. the main breech opening movement being parallel to the barrel axis [5, 2006.01]
F41A 3/14UGR2
. .Rigid bolt locks, i.e. having locking elements rigidly mounted on the bolt or bolt handle and on the barrel or breech-housing respectively [5, 2006.01]
F41A 3/16UGR3
. . .the locking elements effecting a rotary movement about the barrel axis, e.g. rotating cylinder bolt locks [5, 2006.01]
F41A 3/18UGR4
. . . .hand-operated [5, 2006.01]
F41A 3/20UGR5
. . . . .Straight-pull operated bolt locks, i.e. the operating hand effecting only a straight movement parallel to the barrel axis [5, 2006.01]
F41A 3/22UGR5
. . . . .the locking being effected by rotating the operating handle or lever transversely to the barrel axis [5, 2006.01]
F41A 3/24UGR6
. . . . . .the locking elements forming part of the operating handle or lever [5, 2006.01]
F41A 3/26UGR4
. . . .semi-automatically or automatically operated, e.g. having a slidable bolt-carrier and a rotatable bolt [5, 2006.01]
F41A 3/28UGR5
. . . . .having fixed locking elements on the non-rotating bolt and rotating locking elements mounted on the barrel or breech housing, e.g. rotatable rings [5, 2006.01]
F41A 3/30UGR4
. . . .Interlocking means, e.g. locking lugs, screw threads [5, 2006.01]
F41A 3/32UGR3
. . .the bolt being rocked about a notional axis transverse to the barrel axis [5, 2006.01]
F41A 3/34UGR3
. . .the bolt additionally effecting a sliding movement transverse to the barrel axis [5, 2006.01]
F41A 3/36UGR2
. .Semi-rigid bolt locks, i.e. having locking elements movably mounted on the bolt or on the barrrel or breech housing [5, 2006.01]
F41A 3/38UGR3
. . .having rocking locking elements, e.g. pivoting levers or vanes [5, 2006.01]
F41A 3/40UGR4
. . . .mounted on the bolt (F41A 3/42 takes precedence) [5, 2006.01]
F41A 3/42UGR4
. . . .hand-operated [5, 2006.01]
F41A 3/44UGR3
. . .having sliding locking elements, e.g. balls, rollers [5, 2006.01]
F41A 3/46UGR4
. . . .mounted on the bolt (F41A 3/48 takes precedence) [5, 2006.01]
F41A 3/48UGR4
. . . .hand-operated [5, 2006.01]
F41A 3/50UGR3
. . .Toggle-joint locks, e.g. crank-operated [5, 2006.01]
F41A 3/52UGR4
. . . .hand-operated [5, 2006.01]
F41A 3/54UGR2
. .Bolt locks of the unlocked type, i.e. being inertia operated [5, 2006.01]
F41A 3/56UGR3
. . .the bolt being provided with an additional slidable mass [5, 2006.01]
F41A 3/58UGR1
.Breakdown breech mechanisms, e.g. for shotguns [5, 2006.01]
F41A 3/60UGR1
.Breech mechanisms for guns having two or more barrels (F41A 3/58 takes precedence; for revolving-cannon guns F41F 1/10) [5, 2006.01]
F41A 3/62UGR1
.using combustion gas pressure for adding to the mechanical locking action, or for delaying breech opening movement [5, 2006.01]
F41A 3/64UGR1
.Mounting of breech-blocks; Accessories for breech-blocks or breech-block mountings [5, 2006.01]
F41A 3/66UGR2
. .Breech housings or frames; Receivers [5, 2006.01]
F41A 3/68UGR2
. .Bolt stops, i.e. means for limiting bolt opening movement [5, 2006.01]
F41A 3/70UGR2
. .Anti-rebound arrangements, i.e. preventing rebound of the bolt out of the firing position [5, 2006.01]
F41A 3/72UGR2
. .Operating handles or levers; Mounting thereof in breech-blocks or bolts [5, 2006.01]
F41A 3/74UGR2
. .Obturating or packing devices for gas leak prevention in breech mechanisms [5, 2006.01]
F41A 3/76UGR3
. . .specially adapted for sealing the gap between the forward end of the cartridge chamber and the rearward end of the barrel, e.g. sealing devices for revolvers or revolver-type guns [5, 2006.01]
F41A 3/78UGR2
. .Bolt buffer or recuperator means [5, 2006.01]
F41A 3/80UGR3
. . .Adjustable spring buffers [5, 2006.01]
F41A 3/82UGR3
. . .Coil spring buffers (F41A 3/80 takes precedence) [5, 2006.01]
F41A 3/84UGR4
. . . .mounted within the gun stock [5, 2006.01]
F41A 3/86UGR4
. . . .mounted under the barrel [5, 2006.01]
F41A 3/88UGR4
. . . .mounted around the barrel [5, 2006.01]
F41A 3/90UGR3
. . .Fluid buffers [5, 2006.01]
F41A 3/92UGR4
. . . .adjustable [5, 2006.01]
F41A 3/94UGR4
. . . .in combination with spring buffers [5, 2006.01]
F41A 5/00HGRMechanisms or systems operated by propellant charge energy for automatically opening the lock [5, 2006.01]
F41A 5/02UGR1
.recoil-operated [5, 2006.01]
F41A 5/04UGR2
. .the barrel being tilted during recoil [5, 2006.01]
F41A 5/06UGR2
. .the barrel being rotated about its longitudinal axis during recoil [5, 2006.01]
F41A 5/08UGR2
. .having an accelerator lever acting on the breech-block or bolt during the opening movement [5, 2006.01]
F41A 5/10UGR2
. .having a movable inertia weight [5, 2006.01]
F41A 5/12UGR3
. . .mounted in a gun having a fixed barrel [5, 2006.01]
F41A 5/14UGR2
. .Barrel stops, i.e. devices for holding the recoiling barrel in a predetermined position, e.g. the recoil position [5, 2006.01]
F41A 5/16UGR2
. .having a barrel moving forwardly after the firing of a shot [5, 2006.01]
F41A 5/18UGR1
.gas-operated [5, 2006.01]
F41A 5/20UGR2
. .using a gas piston arranged concentrically around the barrel [5, 2006.01]
F41A 5/22UGR2
. .having two or more gas pistons [5, 2006.01]
F41A 5/24UGR2
. .by direct action of gas pressure on bolt or locking elements [5, 2006.01]
F41A 5/26UGR2
. .Arrangements or systems for bleeding the gas from the barrel (F41A 5/20-F41A 5/24 take precedence) [5, 2006.01]
F41A 5/28UGR3
. . .Adjustable systems [5, 2006.01]
F41A 5/30UGR1
.Gas- or recoil-operation, e.g. selection of gas- or recoil-operated systems [5, 2006.01]
F41A 5/32UGR1
.Energy accumulator systems, i.e. systems for opening the breech-block by energy accumulated during barrel or gas piston recoil [5, 2006.01]
F41A 5/34UGR2
. .with spring accumulators [5, 2006.01]
F41A 5/36UGR2
. .with fluid accumulators [5, 2006.01]
F41A 7/00HGRAuxiliary mechanisms for bringing the breech-block or bolt or the barrel to the starting position before automatic firing (operating handles or levers F41A 3/00); Drives for externally-powered guns (revolving-cannon guns F41F 1/00); Remote-controlled gun chargers [5, 2006.01]
F41A 7/02UGR1
.Machine-gun rechargers, e.g. manually operated [5, 2006.01]
F41A 7/04UGR2
. .fluid operated [5, 2006.01]
F41A 7/06UGR2
. .electrically operated [5, 2006.01]
F41A 7/08UGR1
.Drives for externally-powered guns, i.e. drives for moving the breech-block or bolt by an external force during automatic firing [5, 2006.01]
F41A 7/10UGR2
. .using a rotating cylindrical drum having a camming groove [5, 2006.01]
F41A 9/00HGRFeeding or loading of ammunition (adaptations for feeding or loading missiles from magazines in air guns F41B 11/50); Magazines; Guiding means for the extracting of cartridges (cartridge extractors or ejectors F41A 15/00) [5, 2006.01]
F41A 9/01UGR1
.Feeding of unbelted ammunition [5, 2006.01]
F41A 9/02UGR2
. .using wheel conveyors, e.g. star-wheel-shaped conveyors [5, 2006.01]
F41A 9/03UGR2
. .using screw or rotary-spiral conveyors [5, 2006.01]
F41A 9/04UGR2
. .using endless-chain belts carrying a plurality of ammunition [5, 2006.01]
F41A 9/05UGR3
. . .in tandem sequence [5, 2006.01]
F41A 9/06UGR2
. .using cyclically moving conveyors, i.e. conveyors having ammunition pusher or carrier elements which are emptied or disengaged from the ammunition during the return stroke [5, 2006.01]
F41A 9/07UGR3
. . .Reciprocating conveyors, i.e. conveyors pushing a plurality of ammunition during the feeding stroke [5, 2006.01]
F41A 9/09UGR3
. . .Movable ammunition carriers or loading trays, e.g. for feeding from magazines [5, 2006.01]
F41A 9/10UGR4
. . . .pivoting or swinging [5, 2006.01]
F41A 9/11UGR5
. . . . .in a horizontal plane [5, 2006.01]
F41A 9/12UGR6
. . . . . .mounted within a smallarm [5, 2006.01]
F41A 9/13UGR5
. . . . .in a vertical plane [5, 2006.01]
F41A 9/14UGR6
. . . . . .transverse to the barrel axis [5, 2006.01]
F41A 9/15UGR7
. . . . . . .mounted within a smallarm [5, 2006.01]
F41A 9/16UGR6
. . . . . .parallel to the barrel axis [5, 2006.01]
F41A 9/17UGR7
. . . . . . .mounted within a smallarm [5, 2006.01]
F41A 9/18UGR8
. . . . . . . .feeding from a magazine under the barrel [5, 2006.01]
F41A 9/19UGR8
. . . . . . . .feeding from a magazine mounted in the stock [5, 2006.01]
F41A 9/20UGR4
. . . .sliding, e.g. reciprocating [5, 2006.01]
F41A 9/21UGR5
. . . . .in a vertical direction (F41A 9/23 takes precedence) [5, 2006.01]
F41A 9/22UGR5
. . . . .in a horizontal direction (F41A 9/23 takes precedence) [5, 2006.01]
F41A 9/23UGR5
. . . . .mounted within a smallarm [5, 2006.01]
F41A 9/24UGR2
. .using a movable magazine or clip as feeding element [5, 2006.01]
F41A 9/25UGR3
. . .using a sliding clip [5, 2006.01]
F41A 9/26UGR3
. . .using a revolving drum magazine [5, 2006.01]
F41A 9/27UGR4
. . . .in revolver-type guns [5, 2006.01]
F41A 9/28UGR5
. . . . .of smallarm type (in revolvers F41C 3/14) [5, 2006.01]
F41A 9/29UGR1
.Feeding of belted ammunition [5, 2006.01]
F41A 9/30UGR2
. .Sprocket-type belt transporters [5, 2006.01]
F41A 9/31UGR3
. . .with cartridge stripping means [5, 2006.01]
F41A 9/32UGR2
. .Reciprocating-slide-type belt transporters [5, 2006.01]
F41A 9/33UGR3
. . .with cartridge stripping means [5, 2006.01]
F41A 9/34UGR2
. .from magazines (magazines for belted ammunition per seF41A 9/79) [5, 2006.01]
F41A 9/35UGR1
.Feeding multibarrel guns [5, 2006.01]
F41A 9/36UGR2
. .Feed mechanisms for revolving-cannon guns [5, 2006.01]
F41A 9/37UGR1
.Feeding two or more kinds of ammunition to the same gun; Feeding from two sides [5, 2006.01]
F41A 9/38UGR1
.Loading arrangements, i.e. for bringing the ammunition into the firing position [5, 2006.01]
F41A 9/39UGR2
. .Ramming arrangements [5, 2006.01]
F41A 9/40UGR3
. . .the breech-block itself being the rammer [5, 2006.01]
F41A 9/41UGR4
. . . .pushing unbelted ammunition from a box magazine on the gun frame into the cartridge chamber [5, 2006.01]
F41A 9/42UGR3
. . .Rammers separate from breech-block [5, 2006.01]
F41A 9/43UGR4
. . . .Chain rammers [5, 2006.01]
F41A 9/44UGR4
. . . .Fluid-operated piston rammers [5, 2006.01]
F41A 9/45UGR2
. .the cartridge chamber or the barrel as a whole being tiltable between a loading and a firing position [5, 2006.01]
F41A 9/46UGR2
. .the cartridge chamber being formed by two complementary elements, movable one relative to the other for loading [5, 2006.01]
F41A 9/47UGR2
. .using forwardly-sliding barrels or barrel parts for loading [5, 2006.01]
F41A 9/48UGR2
. .by gravitational force [5, 2006.01]
F41A 9/49UGR1
.Internally-powered drives, i.e. operated by propellant charge energy, e.g. couplings, clutches, energy accumulators [5, 2006.01]
F41A 9/50UGR1
.External power or control systems [5, 2006.01]
F41A 9/51UGR2
. .Boosters, i.e. externally-powered motors [5, 2006.01]
F41A 9/52UGR1
.Arrangements for changing from automatic or magazine-loading to hand-loading [5, 2006.01]
F41A 9/53UGR1
.Charged-condition indicators, i.e. indicating the presence of a cartridge in the cartridge chamber [5, 2006.01]
F41A 9/54UGR1
.Cartridge guides, stops or positioners, e.g. for cartridge extraction [5, 2006.01]
F41A 9/55UGR2
. .Fixed guiding means, mounted on, or near, the cartridge chamber [5, 2006.01]
F41A 9/56UGR2
. .Movable guiding means [5, 2006.01]
F41A 9/57UGR3
. . .Flexible chutes, e.g. for guiding belted ammunition from the magazine to the gun [5, 2006.01]
F41A 9/58UGR2
. .Cartridge stops; Cartridge positioners [5, 2006.01]
F41A 9/59UGR1
.Ejectors for clips or magazines, e.g. when empty [5, 2006.01]
F41A 9/60UGR1
.Empty-cartridge-case or belt-link collectors or catchers (F41A 9/81 takes precedence) [5, 2006.01]
F41A 9/61UGR1
.Magazines [5, 2006.01]
F41A 9/62UGR2
. .having means for indicating the number of cartridges left in the magazine, e.g. last-round indicators (last-round safeties F41A 17/40) [5, 2006.01]
F41A 9/63UGR2
. .specially adapted for releasable connection with other magazines [5, 2006.01]
F41A 9/64UGR2
. .for unbelted ammunition [5, 2006.01]
F41A 9/65UGR3
. . .Box magazines having a cartridge follower [5, 2006.01]
F41A 9/66UGR4
. . . .Arrangements thereon for charging, i.e. reloading (apparatus or tools for reloading magazines F41A 9/83) [5, 2006.01]
F41A 9/67UGR5
. . . . .having means for depressing the cartridge follower, or for locking it in a depressed position [5, 2006.01]
F41A 9/68UGR4
. . . .Plural magazines, e.g. tandem magazines [5, 2006.01]
F41A 9/69UGR4
. . . .characterised by multiple-row or zigzag arrangement of cartridges [5, 2006.01]
F41A 9/70UGR4
. . . .Arrangements thereon for discharging, e.g. cartridge followers or discharge throats [5, 2006.01]
F41A 9/71UGR4
. . . .Arrangements thereon for varying capacity; Adapters or inserts for changing cartridge size or type [5, 2006.01]
F41A 9/72UGR3
. . .Tubular magazines, i.e. magazines containing the ammunition in lengthwise tandem sequence [5, 2006.01]
F41A 9/73UGR3
. . .Drum magazines [5, 2006.01]
F41A 9/74UGR4
. . . .with radially disposed cartridges [5, 2006.01]
F41A 9/75UGR4
. . . .having a spiral cartridge channel [5, 2006.01]
F41A 9/76UGR3
. . .Magazines having an endless-chain conveyor [5, 2006.01]
F41A 9/77UGR3
. . .Magazines having a screw conveyor [5, 2006.01]
F41A 9/78UGR3
. . .Magazines having a reciprocating conveyor [5, 2006.01]
F41A 9/79UGR2
. .for belted ammunition [5, 2006.01]
F41A 9/80UGR3
. . .having provision for quick-coupling of the belts of adjacent magazines [5, 2006.01]
F41A 9/81UGR3
. . .having provision for collecting belt links or empty cartridge cases [5, 2006.01]
F41A 9/82UGR1
.Reloading of magazines [5, 2006.01]
F41A 9/83UGR2
. .Apparatus or tools for reloading magazines with unbelted ammunition, e.g. cartridge clips [5, 2006.01]
F41A 9/84UGR3
. . .Clips [5, 2006.01]
F41A 9/85UGR4
. . . .for reloading revolver-type magazines [5, 2006.01]
F41A 9/86UGR2
. .Feeding belted ammunition into magazines [5, 2006.01]
F41A 9/87UGR1
.Ammunition handling dollies or transfer carts (F41A 9/86 takes precedence) [5, 2006.01]
F41A 11/00HGRAssembly or disassembly features; Modular concepts; Articulated or collapsible guns (F41A 3/64, F41A 19/10-F41A 19/15, F41A 21/48, F41A 25/26 take precedence) [5, 2006.01]
F41A 11/02UGR1
.Modular concepts, e.g. weapon-family concepts [5, 2006.01]
F41A 11/04UGR1
.Articulated or collapsible guns, i.e. with hinged or telescopic parts for transport or storage (breakdown shotguns or rifles F41C 7/11; folding or telescopic stocks or stock parts F41C 23/04) [5, 2006.01]
F41A 11/06UGR2
. .Telescopic guns [5, 2006.01]
F41A 13/00HGRCooling or heating systems (barrels or gun tubes with fins or ribs F41A 21/00); Blowing-through of gun barrels; Ventilating systems [5, 2006.01]
F41A 13/02UGR1
.Heating systems [5, 2006.01]
F41A 13/04UGR1
.Injecting fluids into barrels or cartridge chambers (F41A 13/08 takes precedence) [5, 2006.01]
F41A 13/06UGR1
.Evacuating combustion gas from barrels (F41A 13/10 takes precedence) [5, 2006.01]
F41A 13/08UGR2
. .Bore evacuators, i.e. chambers disposed around barrels for storing part of the combustion gas and subsequently injecting it into the barrel to provide suction [5, 2006.01]
F41A 13/10UGR1
.Blowers or turbines for evacuating or cooling guns, e.g. driven by combustion gas pressure or recoil [5, 2006.01]
F41A 13/12UGR1
.Systems for cooling the outer surface of the barrel (F41A 13/10 takes precedence) [5, 2006.01]
F41A 15/00HGRCartridge extractors, i.e. devices for pulling cartridges or cartridge cases at least partially out of the cartridge chamber; Cartridge ejectors, i.e. devices for throwing the extracted cartridges or cartridge cases free of the gun (F41A 9/54 takes precedence) [5, 2006.01]
F41A 15/02UGR1
.for revolver-type guns, e.g. revolvers [5, 2006.01]
F41A 15/04UGR1
.specially adapted for cartridge cases being deformed when fired, e.g. of plastics [5, 2006.01]
F41A 15/06UGR1
.for breakdown guns [5, 2006.01]
F41A 15/08UGR1
.for block-action guns [5, 2006.01]
F41A 15/10UGR2
. .of sliding-block type [5, 2006.01]
F41A 15/12UGR1
.for bolt-action guns [5, 2006.01]
F41A 15/14UGR2
. .the ejector being mounted on, or within, the bolt [5, 2006.01]
F41A 15/16UGR2
. .the ejector being mounted on the breech housing or frame [5, 2006.01]
F41A 15/18UGR1
.for guns with forwardly slidable barrels [5, 2006.01]
F41A 15/20UGR1
.specially adapted for caseless-ammunition duds [5, 2006.01]
F41A 15/22UGR1
.Tools for extracting cartridges [5, 2006.01]
F41A 17/00HGRSafety arrangements, e.g. safeties [5, 2006.01]
F41A 17/02UGR1
.Key-operated safeties [5, 2006.01]
F41A 17/04UGR1
.Safeties of the combination-lock type (F41A 17/02 takes precedence) [5, 2006.01]
F41A 17/06UGR1
.Electric or electromechanical safeties (F41A 17/04, F41A 17/08 take precedence) [5, 2006.01]
F41A 17/08UGR1
.for inhibiting firing in a specified direction, e.g. at a friendly person or at a protected area (F41A 27/02 takes precedence) [5, 2006.01]
F41A 17/10UGR2
. .Firing mechanisms with elevation stop [5, 2006.01]
F41A 17/12UGR2
. .Firing mechanisms with anti-canting safety [5, 2006.01]
F41A 17/14UGR1
.Double-loading prevention [5, 2006.01]
F41A 17/16UGR1
.Cook-off prevention, i.e. prevention of spontaneous firing of a cartridge by chamber wall heat [5, 2006.01]
F41A 17/18UGR1
.Hang-fire prevention [5, 2006.01]
F41A 17/20UGR1
.Grip or stock safeties, i.e. safeties disengaged by clasping the grip or stock (thumb-operated sliding safeties F41A 17/52, F41A 17/62, F41A 17/70, F41A 17/80) [5, 2006.01]
F41A 17/22UGR2
. .acting on the trigger [5, 2006.01]
F41A 17/24UGR2
. .acting on the firing pin [5, 2006.01]
F41A 17/26UGR2
. .acting on the hammer [5, 2006.01]
F41A 17/28UGR2
. .acting on the sear [5, 2006.01]
F41A 17/30UGR1
.Multiple safeties, i.e. safeties acting on at least one element of the firing mechanism and at least one other element of the gun, e.g. the moving barrel [5, 2006.01]
F41A 17/32UGR2
. .the other element being the breech-block or bolt [5, 2006.01]
F41A 17/34UGR1
.Magazine safeties [5, 2006.01]
F41A 17/36UGR2
. .locking the gun in a safety condition when the magazine is empty or removed [5, 2006.01]
F41A 17/38UGR2
. .locking the magazine in the gun [5, 2006.01]
F41A 17/40UGR1
.Last-round safeties (F41A 17/34 takes precedence) [5, 2006.01]
F41A 17/42UGR1
.Safeties for locking the breech-block or bolt in a safety position (F41A 17/32, F41A 17/36, F41A 17/40 take precedence) [5, 2006.01]
F41A 17/44UGR1
.Safety plugs, e.g. for plugging-up cartridge chambers [5, 2006.01]
F41A 17/46UGR1
.Trigger safeties, i.e. means for preventing trigger movement (F41A 17/02-F41A 17/40 take precedence) [5, 2006.01]
F41A 17/48UGR2
. .Automatically operated trigger safeties, i.e. operated by breech opening or closing movement [5, 2006.01]
F41A 17/50UGR3
. . .by breakdown action [5, 2006.01]
F41A 17/52UGR2
. .Thumb-operated sliding safeties mounted on the upside of the stock, e.g. for shotguns [5, 2006.01]
F41A 17/54UGR2
. .Protecting-caps for trigger guards; Trigger locking pieces mounted on, or within, the trigger guard [5, 2006.01]
F41A 17/56UGR1
.Sear safeties, i.e. means for rendering ineffective an intermediate lever transmitting trigger movement to firing pin, hammer, bolt or sear (F41A 17/02-F41A 17/40 take precedence) [5, 2006.01]
F41A 17/58UGR2
. .automatically operated, i.e. operated by breech opening or closing movement [5, 2006.01]
F41A 17/60UGR3
. . .by breakdown action [5, 2006.01]
F41A 17/62UGR2
. .Thumb-operated sliding safeties mounted on the upside of the stock, e.g. for shotguns [5, 2006.01]
F41A 17/64UGR1
.Firing-pin safeties, i.e. means for preventing movement of slidably-mounted strikers (F41A 17/02-F41A 17/40 take precedence) [5, 2006.01]
F41A 17/66UGR2
. .automatically operated, i.e. operated by breech opening or closing movement [5, 2006.01]
F41A 17/68UGR3
. . .by breakdown action [5, 2006.01]
F41A 17/70UGR2
. .Thumb-operated sliding safeties mounted on the upside of the stock, e.g. for shotguns [5, 2006.01]
F41A 17/72UGR2
. .trigger-operated, i.e. the movement of the trigger bringing a firing-pin safety into inoperative position during the firing [5, 2006.01]
F41A 17/74UGR1
.Hammer safeties, i.e. for preventing the hammer from hitting the cartridge or the firing pin (F41A 17/02-F41A 17/40 take precedence) [5, 2006.01]
F41A 17/76UGR2
. .automatically operated, i.e. operated by breech opening or closing movement [5, 2006.01]
F41A 17/78UGR3
. . .by breakdown action [5, 2006.01]
F41A 17/80UGR2
. .Thumb-operated sliding safeties mounted on the upside of the stock, e.g. for shotguns [5, 2006.01]
F41A 17/82UGR2
. .trigger-operated, i.e. the movement of the trigger bringing a hammer safety into inoperative position during firing [5, 2006.01]
F41A 19/00HGRFiring or trigger mechanisms; Cocking mechanisms [5, 2006.01]
F41A 19/01UGR1
.Counting means indicating the number of shots fired [5, 2006.01]
F41A 19/02UGR2
. .Burst limiters (F41A 19/67 takes precedence) [5, 2006.01]
F41A 19/03UGR1
.Shot-velocity control (F41A 3/78, F41A 5/28, F41A 19/05, F41A 19/66 take precedence) [5, 2006.01]
F41A 19/04UGR2
. .by controlling the time of release of the firing pin or hammer [5, 2006.01]
F41A 19/05UGR1
.Synchronising for firing through the propeller of an aircraft [5, 2006.01]
F41A 19/06UGR1
.Mechanical firing mechanisms (F41A 19/01-F41A 19/05, F41A 19/59 take precedence) [5, 2006.01]
F41A 19/07UGR2
. .press-button actuated, e.g. with thumb rest [5, 2006.01]
F41A 19/08UGR2
. .remote actuated; lanyard actuated [5, 2006.01]
F41A 19/09UGR2
. .Auxiliary trigger devices (F41A 19/08 takes precedence) [5, 2006.01]
F41A 19/10UGR2
. .Triggers; Trigger mountings [5, 2006.01]
F41A 19/11UGR2
. .Trigger guards; Trigger-guard mountings (F41A 19/15 takes precedence) [5, 2006.01]
F41A 19/12UGR2
. .Sears; Sear mountings [5, 2006.01]
F41A 19/13UGR2
. .Percussion or firing pins, i.e. fixed or slidably- mounted striker elements; Mountings therefor [5, 2006.01]
F41A 19/14UGR2
. .Hammers, i.e. pivotably-mounted striker elements; Hammer mountings [5, 2006.01]
F41A 19/15UGR2
. .Modular firing mechanism units [5, 2006.01]
F41A 19/16UGR2
. .Adjustable firing mechanisms; Trigger mechanisms with adjustable trigger pull (F41A 19/17 takes precedence) [5, 2006.01]
F41A 19/17UGR2
. .Hair-trigger mechanisms [5, 2006.01]
F41A 19/18UGR2
. .for multibarrel guns (F41A 19/68 takes precedence) [5, 2006.01]
F41A 19/19UGR3
. . .with single-trigger firing possibility [5, 2006.01]
F41A 19/20UGR4
. . . .Double-trigger arrangements having the possibility of single-trigger actuation [5, 2006.01]
F41A 19/21UGR4
. . . .having only one trigger [5, 2006.01]
F41A 19/22UGR5
. . . . .and only one striker element [5, 2006.01]
F41A 19/23UGR6
. . . . . .rotatable about an axis parallel to the barrel axis for firing subsequent barrels [5, 2006.01]
F41A 19/24UGR2
. .Release-trigger mechanisms, i.e. the striker element being released during the return movement of the trigger subsequent to trigger pull [5, 2006.01]
F41A 19/25UGR2
. .having only slidably-mounted striker elements, i.e. percussion or firing pins [5, 2006.01]
F41A 19/26UGR3
. . .the percussion or firing pin and the breech-block or bolt forming one piece [5, 2006.01]
F41A 19/27UGR3
. . .the percussion or firing pin being movable relative to the breech-block [5, 2006.01]
F41A 19/28UGR4
. . . .propelled by a cam or lever when the breech-block or bolt arrives at a closing position [5, 2006.01]
F41A 19/29UGR4
. . . .propelled by a spring under tension [5, 2006.01]
F41A 19/30UGR5
. . . . .in bolt-action guns [5, 2006.01]
F41A 19/31UGR6
. . . . . .Sear arrangements therefor (F41A 19/33 takes precedence) [5, 2006.01]
F41A 19/32UGR7
. . . . . . .for catching the percussion or firing pin after each shot, i.e. in single-shot or semi-automatic firing mode [5, 2006.01]
F41A 19/33UGR6
. . . . . .Arrangements for the selection of automatic or semi-automatic fire [5, 2006.01]
F41A 19/34UGR6
. . . . . .Cocking mechanisms [5, 2006.01]
F41A 19/35UGR7
. . . . . . .Double-action mechanisms, i.e. the cocking being effected during the first part of the trigger pull movement [5, 2006.01]
F41A 19/36UGR5
. . . . .in block-action guns [5, 2006.01]
F41A 19/37UGR6
. . . . . .Cocking mechanisms [5, 2006.01]
F41A 19/38UGR7
. . . . . . .Double-action mechanisms, i.e. the cocking being effected during the first part of the trigger pull movement [5, 2006.01]
F41A 19/39UGR5
. . . . .Cocking mechanisms for other types of guns, e.g. fixed breech-block types, forwardly-slidable barrel types [5, 2006.01]
F41A 19/40UGR6
. . . . . .Double-action mechanisms, i.e. the cocking being effected during the first part of the trigger pull movement [5, 2006.01]
F41A 19/41UGR6
. . . . . .for breakdown guns [5, 2006.01]
F41A 19/42UGR2
. .having at least one hammer [5, 2006.01]
F41A 19/43UGR3
. . .in bolt-action guns [5, 2006.01]
F41A 19/44UGR4
. . . .Sear arrangements therefor (F41A 19/46 takes precedence) [5, 2006.01]
F41A 19/45UGR5
. . . . .for catching the hammer after each shot, i.e. in single-shot or semi- automatic firing mode [5, 2006.01]
F41A 19/46UGR4
. . . .Arrangements for the selection of automatic or semi-automatic fire [5, 2006.01]
F41A 19/47UGR4
. . . .Cocking mechanisms [5, 2006.01]
F41A 19/48UGR5
. . . . .Double-action mechanisms, i.e. the cocking being effected during the first part of the trigger pull movement [5, 2006.01]
F41A 19/49UGR3
. . .in block-action guns [5, 2006.01]
F41A 19/50UGR4
. . . .Cocking mechanisms [5, 2006.01]
F41A 19/51UGR5
. . . . .Double-action mechanisms, i.e. the cocking being effected during the first part of the trigger pull movement [5, 2006.01]
F41A 19/52UGR3
. . .Cocking mechanisms for other types of guns, e.g. fixed breech-block types, revolvers [5, 2006.01]
F41A 19/53UGR4
. . . .Double-action mechanisms, i.e. the cocking being effected during the first part of the trigger pull movement [5, 2006.01]
F41A 19/54UGR4
. . . .for breakdown guns [5, 2006.01]
F41A 19/55UGR1
.Fluid-operated firing mechanisms [5, 2006.01]
F41A 19/56UGR2
. .Ignition of the propellant charge by contact with air heated by adiabatic compression [5, 2006.01]
F41A 19/57UGR1
.Firing mechanisms operating with primer cartridge [5, 2006.01]
F41A 19/58UGR1
.Electric firing mechanisms (F41A 17/10, F41A 17/12 take precedence) [5, 2006.01]
F41A 19/59UGR2
. .Electromechanical firing mechanisms, i.e. the mechanical striker element being propelled or released by electric means [5, 2006.01]
F41A 19/60UGR2
. .characterised by the means for generating electric energy [5, 2006.01]
F41A 19/61UGR3
. . .Inductive generators [5, 2006.01]
F41A 19/62UGR3
. . .Piezo-electric generators [5, 2006.01]
F41A 19/63UGR2
. .having means for contactless transmission of electric energy, e.g. by induction, by sparking gap [5, 2006.01]
F41A 19/64UGR2
. .for automatic or burst-firing mode [5, 2006.01]
F41A 19/65UGR3
. . .for giving ripple fire, i.e. using electric sequencer switches for timed multiple-charge launching, e.g. for rocket launchers [5, 2006.01]
F41A 19/66UGR3
. . .Electronic shot-velocity control (F41A 19/65 takes precedence) [5, 2006.01]
F41A 19/67UGR3
. . .Burst limiters [5, 2006.01]
F41A 19/68UGR2
. .for multibarrel guns (F41A 19/65 takes precedence) [5, 2006.01]
F41A 19/69UGR2
. .Electric contacts or switches peculiar thereto (F41A 19/65 takes precedence) [5, 2006.01]
F41A 19/70UGR3
. . .Electric firing pins; Mountings therefor [5, 2006.01]
F41A 21/00HGRBarrels or gun tubes; Muzzle attachments; Barrel mounting means (F41A 25/00 takes precedence; barrel attachments for firing grenades or riot-control ammunition from smallarms F41C 27/06; sighting devices F41G 1/00) [5, 2006.01]
F41A 21/02UGR1
.Composite barrels, i.e. barrels having multiple layers, e.g. of different materials [5, 2006.01]
F41A 21/04UGR2
. .Barrel liners [5, 2006.01]
F41A 21/06UGR1
.Plural barrels [5, 2006.01]
F41A 21/08UGR2
. .Barrel junctions [5, 2006.01]
F41A 21/10UGR1
.Insert barrels, i.e. barrels for firing reduced calibre ammunition and being mounted within the normal barrels [5, 2006.01]
F41A 21/12UGR1
.Cartridge chambers; Chamber liners (F41A 3/74, F41A 9/46, F41A 21/04 take precedence) [5, 2006.01]
F41A 21/14UGR2
. .Arrangement of cartridge chambers lateral to the barrel axis [5, 2006.01]
F41A 21/16UGR1
.Barrels or gun tubes characterised by the shape of the bore [5, 2006.01]
F41A 21/18UGR2
. .Grooves; Rifling [5, 2006.01]
F41A 21/20UGR1
.Barrels or gun tubes characterised by the material (F41A 21/02 takes precedence) [5, 2006.01]
F41A 21/22UGR1
.Barrels which have undergone surface treatment, e.g. phosphating [5, 2006.01]
F41A 21/24UGR1
.Barrels or gun tubes with fins or ribs, e.g. for cooling [5, 2006.01]
F41A 21/26UGR1
.specially adapted for recoil reinforcement, e.g. for training purposes [5, 2006.01]
F41A 21/28UGR1
.Gas-expansion chambers; Barrels provided with gas-relieving ports (F41A 1/06, F41A 13/08 take precedence) [5, 2006.01]
F41A 21/30UGR1
.Silencers [5, 2006.01]
F41A 21/32UGR1
.Muzzle attachments or glands  (F41A 21/26, F41A 21/30, F41A 21/46 take precedence) [5, 2006.01]
F41A 21/34UGR2
. .Flash dampers [5, 2006.01]
F41A 21/36UGR2
. .for recoil reduction (recoil reduction arrangements in general F41A 25/00) [5, 2006.01]
F41A 21/38UGR3
. . .adjustable [5, 2006.01]
F41A 21/40UGR2
. .Chokes for shotguns [5, 2006.01]
F41A 21/42UGR3
. . .adjustable [5, 2006.01]
F41A 21/44UGR1
.Insulation jackets; Protective jackets [5, 2006.01]
F41A 21/46UGR1
.Barrels having means for separating sabots from projectiles [5, 2006.01]
F41A 21/48UGR1
.Barrel mounting means, e.g. releasable mountings for replaceable barrels [5, 2006.01]
F41A 23/00HGRGun mountings, e.g. on vehicles; Disposition of guns on vehicles (F41A 25/00, F41A 27/00 take precedence) [5, 2006.01]
F41A 23/02UGR1
.Mountings without wheels [5, 2006.01]
F41A 23/04UGR2
. .Unipods [5, 2006.01]
F41A 23/06UGR3
. . .adjustable [5, 2006.01]
F41A 23/08UGR2
. .Bipods [5, 2006.01]
F41A 23/10UGR3
. . .adjustable [5, 2006.01]
F41A 23/12UGR2
. .Tripods [5, 2006.01]
F41A 23/14UGR3
. . .adjustable [5, 2006.01]
F41A 23/16UGR2
. .Testing mounts [5, 2006.01]
F41A 23/18UGR2
. .Rests for supporting smallarms in non-shooting position (racks for storage A47B 81/00; racks in vehicles B60R 11/00) [5, 2006.01]
F41A 23/20UGR1
.for disappearing guns [5, 2006.01]
F41A 23/22UGR2
. .on board of submarines [5, 2006.01]
F41A 23/24UGR1
.Turret gun mountings (feeding, loading or guiding ammunition F41A 9/00; mechanical elevating or traversing systems for turret guns F41A 27/18) [5, 2006.01]
F41A 23/26UGR1
.Mountings for transport only; Loading or unloading arrangements for guns for use with carrier vehicles (F41A 23/50 takes precedence) [5, 2006.01]
F41A 23/28UGR1
.Wheeled-gun mountings; Endless-track gun mountings [5, 2006.01]
F41A 23/30UGR2
. .the wheels being liftable from the ground for firing [5, 2006.01]
F41A 23/32UGR2
. .with split trails (F41A 23/30, F41A 23/46 take precedence) [5, 2006.01]
F41A 23/34UGR1
.on wheeled or endless-track vehicles [5, 2006.01]
F41A 23/36UGR2
. .on trailers (F41A 23/42 takes precedence) [5, 2006.01]
F41A 23/38UGR2
. .on motorcycles [5, 2006.01]
F41A 23/40UGR2
. .on rail vehicles [5, 2006.01]
F41A 23/42UGR2
. .for rocket throwers [5, 2006.01]
F41A 23/44UGR1
.on sledges [5, 2006.01]
F41A 23/46UGR1
.Trail spades [5, 2006.01]
F41A 23/48UGR2
. .elastic [5, 2006.01]
F41A 23/50UGR1
.Travelling locks; Brakes for holding the gun platform in a fixed position during transport [5, 2006.01]
F41A 23/52UGR1
.Base plates for gun mountings [5, 2006.01]
F41A 23/54UGR2
. .for mortars [5, 2006.01]
F41A 23/56UGR1
.Arrangements for adjusting the gun platform in the vertical or horizontal position (F41A 17/10, F41A 17/12 take precedence) [5, 2006.01]
F41A 23/58UGR2
. .Hydraulic jacks [5, 2006.01]
F41A 23/60UGR2
. .Screw-operated jacks [5, 2006.01]
F41A 25/00HGRGun mountings permitting recoil or return to battery, e.g. gun cradles; Barrel buffers or brakes (recoilless guns F41A 1/08) [5, 2006.01]
F41A 25/02UGR1
.Fluid-operated systems [5, 2006.01]
F41A 25/04UGR2
. .adjustable [5, 2006.01]
F41A 25/06UGR1
.Friction-operated systems [5, 2006.01]
F41A 25/08UGR2
. .adjustable [5, 2006.01]
F41A 25/10UGR1
.Spring-operated systems [5, 2006.01]
F41A 25/12UGR2
. .using coil springs [5, 2006.01]
F41A 25/14UGR3
. . .adjustable [5, 2006.01]
F41A 25/16UGR1
.Hybrid systems [5, 2006.01]
F41A 25/18UGR2
. .Hydroelastic systems [5, 2006.01]
F41A 25/20UGR2
. .Hydropneumatic systems [5, 2006.01]
F41A 25/22UGR1
.Bearing arrangements for the reciprocating gun-mount or barrel movement [5, 2006.01]
F41A 25/24UGR2
. .using ball or roller bearings [5, 2006.01]
F41A 25/26UGR1
.Assembling or dismounting recoil elements or systems [5, 2006.01]
F41A 27/00HGRGun mountings permitting traversing or elevating movement, e.g. gun carriages [5, 2006.01]
F41A 27/02UGR1
.Control systems for preventing interference between the moving gun and the adjacent structure [5, 2006.01]
F41A 27/04UGR1
.Scatter-fire arrangements, i.e. means for oscillating guns automatically during firing [5, 2006.01]
F41A 27/06UGR1
.Mechanical systems (F41A 27/02, F41A 27/04, F41A 27/30 take precedence) [5, 2006.01]
F41A 27/08UGR2
. .Bearings, e.g. trunnions; Brakes or blocking arrangements [5, 2006.01]
F41A 27/10UGR3
. . .Bearings for supporting a pivoting gun in a wall, e.g. a turret wall [5, 2006.01]
F41A 27/12UGR3
. . .Brakes or locks for blocking traversing or elevating gear in a fixed position [5, 2006.01]
F41A 27/14UGR3
. . .Central-pivot bearings [5, 2006.01]
F41A 27/16UGR3
. . .using raceway bearings, e.g. for supporting the turret [5, 2006.01]
F41A 27/18UGR2
. .for gun turrets (F41A 27/08 takes precedence) [5, 2006.01]
F41A 27/20UGR3
. . .Drives for turret movements [5, 2006.01]
F41A 27/22UGR2
. .Traversing gear (F41A 27/18 takes precedence) [5, 2006.01]
F41A 27/24UGR2
. .Elevating gear (F41A 27/18 takes precedence) [5, 2006.01]
F41A 27/26UGR1
.Fluid-operated systems (F41A 27/02, F41A 27/04, F41A 27/30 take precedence) [5, 2006.01]
F41A 27/28UGR1
.Electrically-operated systems (F41A 27/02, F41A 27/04, F41A 27/30 take precedence) [5, 2006.01]
F41A 27/30UGR1
.Stabilisation or compensation systems, e.g. compensating for barrel weight or wind force [5, 2006.01]
F41A 29/00HGRCleaning or lubricating arrangements (injecting fluids into barrels or cartridge chambers F41A 13/04) [5, 2006.01]
F41A 29/02UGR1
.Scrapers or cleaning rods [5, 2006.01]
F41A 29/04UGR1
.Lubricating, oiling or greasing means, e.g. operating during use [5, 2006.01]
F41A 31/00HGRTesting arrangements (testing mounts F41A 23/16) [5, 2006.01]
F41A 31/02UGR1
.for checking gun barrels [5, 2006.01]
F41A 33/00HGRAdaptations for training (adaptations of barrels for recoil reinforcement F41A 21/26); Gun simulators (teaching or practice apparatus for gun-aiming or gun-laying F41G 3/26) [5, 2006.01]
F41A 33/02UGR1
.Light- or radiation-emitting guns [5, 2006.01]
F41A 33/04UGR1
.Acoustical simulation of gun fire, e.g. by pyrotechnic means [5, 2006.01]
F41A 33/06UGR1
.Recoil simulators [5, 2006.01]
F41A 35/00HGRAccessories or details not otherwise provided for [5, 2006.01]
F41A 35/02UGR1
.Dust- or weather-protection caps or covers (protecting-caps for trigger guards F41A 17/54) [5, 2006.01]
F41A 35/04UGR2
. .Muzzle covers [5, 2006.01]
F41A 35/06UGR1
.Adaptation of guns to both right and left hand use [5, 2006.01]
F41A 99/00HGRSubject matter not provided for in other groups of this subclass [2006.01]