IPC-Stelle: D03D 47/12 [Version 7 (gültig ab 01.2000)]

SymbolTypTitel
DSKTEXTILES; PAPER
D03KLWEAVING
D03DUKLWOVEN FABRICS; METHODS OF WEAVING; LOOMS
D03D 1/00ZWWoven fabrics; Methods of weaving other than those characterised by the operation of a particular loom
D03D 1/00HGRWoven fabrics designed to make specified articles
D03D 1/02UGR1
.Inflatable articles
D03D 1/04UGR1
.Sack- or bag-like articles
D03D 1/06UGR1
.Curtain heading tapes
D03D 1/08UGR1
.Ladder tapes (ladder tapes for venetian blinds E06B 9/382)
D03D 3/00HGRWoven fabrics characterised by their shape
D03D 3/02UGR1
.Tubular fabrics
D03D 3/04UGR1
.Endless fabrics
D03D 3/06UGR1
.Fabrics of varying width
D03D 3/08UGR1
.Arched, corrugated, or like fabrics
D03D 5/00HGRSelvedges
D03D 7/00HGRWoven fabrics designed to be resilient, i.e. to recover from compressive stress
D03D 9/00HGROpen-work fabrics (ladder-tape fabrics D03D 1/08)
D03D 11/00HGRDouble or multi-ply fabrics not otherwise provided for
D03D 11/02UGR1
.Fabrics formed with pockets, tubes, loops, folds, tucks, or flaps (fabrics for curtain heading tapes D03D 1/06; fabrics consisting of a single tube D03D 3/02)
D03D 13/00HGRWoven fabrics characterised by the special disposition of the warp or weft threads, e.g. with curved weft threads, with discontinuous warp threads, with diagonal warp or weft
D03D 15/00HGRWoven fabrics characterised by the material or construction of the yarn or other warp or weft elements used
D03D 15/02UGR1
.the warp or weft elements being of stiff material, e.g. wire, cane, slat
D03D 15/04UGR1
.woven to produce shapes or effects upon differential shrinkage
D03D 15/06UGR1
.using scaffolding threads, i.e. threads removed after weaving
D03D 15/08UGR1
.using stretchable or elastic threads (woven fabrics whose elastic or stretch properties are due to the manner of weaving D03D 17/00)
D03D 15/10UGR1
.using threads having high or low coefficients of friction
D03D 15/12UGR1
.using heat-resistant or fireproof threads
D03D 17/00HGRWoven fabrics having elastic or stretch properties due to manner of weaving (fabrics using stretchable or elastic threads D03D 15/08)
D03D 19/00HGRGauze or leno-woven fabrics
D03D 21/00HGRLappet- or swivel-woven fabrics
D03D 23/00HGRGeneral weaving methods not special to the production of any particular woven fabric or the use of any particular loom; Weaves not provided for in any other single group
D03D 25/00HGRWoven fabrics not otherwise provided for
D03D 27/00HGRWoven pile fabrics
D03D 27/02UGR1
.wherein the pile is formed by warp or weft
D03D 27/04UGR2
. .Weft pile fabrics
D03D 27/06UGR2
. .Warp pile fabrics
D03D 27/08UGR3
. . .Terry fabrics
D03D 27/10UGR2
. .Fabrics woven face-to-face, e.g. double velvet
D03D 27/12UGR1
.wherein pile tufts are inserted during weaving
D03D 27/14UGR2
. .with tufts around warps
D03D 27/16UGR2
. .with tufts around wefts
D03D 27/18UGR1
.Chenille fabrics
D03D 29/00ZWLooms; Methods of weaving characterised by the operation of particular looms
D03D 29/00HGRHand looms
D03D 31/00HGRLappet, swivel or other looms for forming embroidery-like decoration on fabrics
D03D 33/00HGRMultiple looms, i.e. two or more looms assembled together, whether or not they have mechanisms in common (D03D 35/00 takes precedence)
D03D 35/00HGRSmallware looms, i.e. looms for weaving ribbons or other narrow fabrics (D03D 47/00 takes precedence)
D03D 37/00HGRCircular looms (looms for weaving separate fabrics disposed in a circle or polygon D03D 33/00)
D03D 39/00HGRPile-fabric looms
D03D 39/02UGR1
.Axminster looms, i.e. wherein pile tufts are inserted during weaving
D03D 39/04UGR2
. .Spool Axminster looms
D03D 39/06UGR3
. . .Tuft yarn tube or spool frames
D03D 39/08UGR2
. .Gripper Axminster looms
D03D 39/10UGR1
.Wire-tapestry looms, e.g. for weaving velvet or Brussels or Wilton carpets, the pile being formed over weftwise wires
D03D 39/12UGR2
. .Mechanisms for operating the pile wires
D03D 39/14UGR2
. .Construction of the pile wires, e.g. pile wires which cut
D03D 39/16UGR1
.Double-plush looms, i.e. for weaving two pile fabrics face-to-face
D03D 39/18UGR2
. .Separating the two plush layers, e.g. by cutting
D03D 39/20UGR1
.Looms forming pile over warpwise wires
D03D 39/22UGR1
.Terry looms
D03D 39/24UGR1
.Devices for cutting the pile on the loom (pile wires which cut D03D 39/14; separating two plush layers D03D 39/18)
D03D 41/00HGRLooms not otherwise provided for, e.g. for weaving chenille yarn; Details peculiar to these looms
D03D 43/00HGRLooms with change-boxes
D03D 43/02UGR1
.with drop boxes
D03D 43/04UGR2
. .Operating mechanisms
D03D 43/06UGR1
.with rotary boxes
D03D 43/08UGR2
. .Operating mechanisms
D03D 43/10UGR1
.Weft catchers, i.e. means for preventing entanglement of wefts
D03D 45/00HGRLooms with automatic weft replenishment (automatic replenishment in smallware looms D03D 35/00 , in circular looms D03D 37/00; bobbins rewound on loom D03J 1/12)
D03D 45/02UGR1
.Controlling replenishment
D03D 45/04UGR2
. .Pirn feelers or other detectors for initiating replenishment (weft stop motions D03D 51/34)
D03D 45/06UGR3
. . .mechanical
D03D 45/08UGR4
. . . .of the side-slip type
D03D 45/10UGR3
. . .electrical
D03D 45/12UGR3
. . .optical
D03D 45/14UGR2
. .Storing the need for replenishment or the colour required until the spent shuttle returns to the replenishing end of the loom
D03D 45/16UGR3
. . .selecting thereby weft of correct colour
D03D 45/18UGR2
. .Shuttle feelers or other devices for preventing replenishment if shuttle is incorrectly positioned in shuttle box (shuttle stop motions D03D 51/40)
D03D 45/20UGR1
.Changing bobbins, cops, or other shuttle stock
D03D 45/22UGR2
. .effected with shuttle in normal shuttle box
D03D 45/24UGR2
. .effected otherwise than in normal box
D03D 45/26UGR2
. .Magazines
D03D 45/28UGR3
. . .for one type of thread, e.g. same colour
D03D 45/30UGR4
. . . .rotary
D03D 45/32UGR3
. . .for several types of thread, e.g. multicolour
D03D 45/34UGR1
.Shuttle changing
D03D 45/36UGR2
. .fresh shuttle being substituted for spent shuttle in the same cell of shuttle box
D03D 45/38UGR2
. .Shuttle box with an extra cell which is used only during replenishment
D03D 45/40UGR3
. . .the spent shuttle being received in the normal cell and the fresh shuttle being picked from the extra cell
D03D 45/42UGR3
. . .the spent shuttle being received in the extra cell and the fresh shuttle being picked from the normal cell
D03D 45/44UGR2
. .Magazines
D03D 45/46UGR3
. . .for one type of thread, e.g. single colour
D03D 45/48UGR3
. . .for several types of threads, e.g. multicolour
D03D 45/50UGR1
.Cutting, holding, manipulating, or disposing of, weft ends
D03D 45/52UGR2
. .Cutting weft of depleted shuttle near shuttle and holding the piece attached to the fabric
D03D 45/54UGR2
. .Cutting fresh weft and holding the piece attached to the fabric
D03D 45/56UGR2
. .Cutting depleted and fresh wefts at selvedge
D03D 45/58UGR2
. .Removing tip bunch or fresh weft end from fresh bobbin
D03D 45/60UGR3
. . .substantially by air stream or suction
D03D 45/62UGR2
. .Disposing of waste pieces of cut weft end (D03D 45/58 takes precedence)
D03D 47/00HGRLooms in which bulk supply of weft does not pass through shed, e.g. shuttleless looms, gripper shuttle looms, dummy shuttle looms (circular looms D03D 37/00)
D03D 47/02UGR1
.wherein loops of continuous weft thread are inserted, i.e. double picks (D03D 47/27 takes precedence) [3]
D03D 47/04UGR2
. .by a reciprocating needle having a permanently-threaded eye
D03D 47/06UGR2
. .by a pivoted having a permanently-threaded eye
D03D 47/08UGR3
. . .the path of the needle being modified by cams, linkages, or other means
D03D 47/10UGR2
. .by a forked needle pushing loop of weft through shed
D03D 47/12UGR1
.wherein single picks of weft thread are inserted, i.e. with shedding between each pick (D03D 47/27 takes precedence) [3]
D03D 47/14UGR2
. .by a gripper needle taking the end of the weft through the shed
D03D 47/16UGR2
. .by a gripper needle entering the shed empty and drawing the weft as it retracts
D03D 47/18UGR2
. .two weft inserters meeting at or near the middle of the shed and transferring the weft from one to the other
D03D 47/20UGR2
. .Constructional features of the thread-engaging device on the inserters
D03D 47/22UGR3
. . .adapted for working a loop of weft part-way inserted in the shed and then straightened-out
D03D 47/23UGR3
. . .Thread grippers (in dummy or gripper shuttles D03J 5/06) [3]
D03D 47/24UGR2
. .by gripper or dummy shuttle (travelling-wave-shed looms D03D 47/26; inserting mechanisms for shuttles D03D 49/24; gripper or dummy shuttles per se D03J 5/06)
D03D 47/25UGR3
. . .inserted from only one side of loom [3]
D03D 47/26UGR2
. .Travelling-wave-shed looms
D03D 47/27UGR1
.Drive or guide mechanisms for weft inserting [3]
D03D 47/28UGR1
.wherein the weft itself is projected into the shed
D03D 47/30UGR2
. .by gas jet
D03D 47/32UGR2
. .by liquid jet
D03D 47/34UGR1
.Handling the weft between bulk storage and weft-inserting means
D03D 47/36UGR2
. .Measuring and cutting the weft
D03D 47/38UGR2
. .Weft pattern mechanisms
D03D 47/39UGR1
.wherein cane, straw, slats, material for hair-cloth or similar material is handled [3]
D03D 47/40UGR1
.Forming selvedges
D03D 47/42UGR2
. .by knitting or interlacing loops of weft
D03D 47/44UGR3
. . .with additional selvedge thread
D03D 47/46UGR2
. .by selvedge shuttle or other device passing selvedge thread through loop of weft (by knitting D03D 47/44)
D03D 47/48UGR2
. .by inserting cut end of weft in next shed, e.g. by tucking, by blowing
D03D 47/50UGR2
. .by adhesion
D03D 49/00HGRDetails or constructional features not peculiar to looms of a particular type (temples D03J 1/22)
D03D 49/02UGR1
.Construction of loom framework
D03D 49/04UGR1
.Control of the tension in warp or cloth
D03D 49/06UGR2
. .Warp let-off mechanisms (construction of warp beam D02H)
D03D 49/08UGR3
. . .Warp beam brakes
D03D 49/10UGR3
. . .Driving the warp beam to let the warp off
D03D 49/12UGR2
. .Controlling warp tension by means other than let-off mechanisms
D03D 49/14UGR3
. . .Compensating for tension differences during shedding
D03D 49/16UGR3
. . .Warp supplied by creel
D03D 49/18UGR2
. .Devices for indicating warp tension (measuring tension of threads in general G01L 5/04)
D03D 49/20UGR2
. .Take-up motions; Cloth beams (storage racks for beams D02H)
D03D 49/22UGR2
. .Back rests; Lease rods; Brest beams
D03D 49/24UGR1
.Mechanisms for inserting shuttle in shed (shuttles per se D03J 5/00)
D03D 49/26UGR2
. .Picking mechanisms, e.g. for propelling gripper shuttles or dummy shuttles
D03D 49/28UGR3
. . .Driving mechanisms for the picker stick
D03D 49/30UGR4
. . . .operated by cam
D03D 49/32UGR4
. . . .operated by previously-loaded spring or equivalent
D03D 49/34UGR4
. . . .operated by liquid or gas pressure
D03D 49/36UGR3
. . .Pickers; Arresting means therefor (check straps D03D 49/40)
D03D 49/38UGR3
. . .Picking sticks; Arresting means therefor (check straps D03D 49/40)
D03D 49/40UGR3
. . .Check straps; Lug straps; Similar strap components
D03D 49/42UGR2
. .whereby the shuttle is propelled by liquid or gas pressure
D03D 49/44UGR2
. .whereby the shuttle is propelled by electric or magnetic means
D03D 49/46UGR2
. .wherein the shuttle is pushed or pulled positively (travelling-wave-shed type looms D03D 47/26)
D03D 49/48UGR2
. .positioning shuttle in readiness for picking
D03D 49/50UGR2
. .Miscellaneous devices or arrangements concerning insertion of the weft and not otherwise provided for
D03D 49/52UGR1
.Shuttle boxes (change-boxes D03D 43/00)
D03D 49/54UGR2
. .Braking means; Swells
D03D 49/56UGR3
. . .Shuttle relief mechanisms, i.e. reducing shuttle swell pressure before picking
D03D 49/58UGR1
.Shuttle guards
D03D 49/60UGR1
.Construction or operation of slay
D03D 49/62UGR2
. .Reeds mounted on slay
D03D 49/64UGR2
. .wherein the slay dwells or moves slowly while the weft is being inserted
D03D 49/66UGR2
. .Shuttle races
D03D 49/68UGR1
.Reeds or beat-up combs not mounted on the slay (loose reed stop motion D03D 51/42)
D03D 49/70UGR1
.Devices for cutting weft threads (cutting weft in looms with automatic weft replenishment D03D 45/50; apparatus for slitting fabric D03J 1/08)
D03D 51/00HGRDriving, starting, or stopping arrangements; Automatic stop motions
D03D 51/02UGR1
.General arrangements of driving mechanism
D03D 51/04UGR1
.Manual controls
D03D 51/06UGR1
.using particular methods of stopping
D03D 51/08UGR2
. .stopping at definite point in weaving cycle, or moving to such point after stopping
D03D 51/10UGR2
. .stopping suddenly
D03D 51/12UGR1
.for adjusting speed
D03D 51/14UGR1
.for reducing speed temporarily
D03D 51/16UGR1
.for varying speed cyclically
D03D 51/18UGR1
.Automatic stop motions
D03D 51/20UGR2
. .Warp stop motions
D03D 51/22UGR3
. . .mechanical
D03D 51/24UGR4
. . . .wherein droppers are suspended on individual warp threads or small groups of threads
D03D 51/26UGR4
. . . .Detector healds
D03D 51/28UGR3
. . .electrical
D03D 51/30UGR4
. . . .wherein droppers are suspended on individual warp threads or small groups of threads
D03D 51/32UGR4
. . . .Detector healds
D03D 51/34UGR2
. .Weft stop motions
D03D 51/36UGR3
. . .Centre weft forks
D03D 51/38UGR3
. . .Side weft forks
D03D 51/40UGR2
. .Shuttle stop motions
D03D 51/42UGR3
. . .Loose reed mechanisms
D03D 51/44UGR2
. .acting on defective operation of loom mechanisms
D03D 51/46UGR3
. . .of shedding mechanisms